Video not centered (VGA sources only)

The image from the source is displayed too high or low, or too far to the left or right.

1. Login to the VGA Grid HD Encoder's Admin panel as admin. See Connect to the Admin panel.

3. From the HD Encoder Admin panel, click Frame Grabber from the Configuration menu; the Frame Grabber Adjustments page opens.

4. To move the video horizontally to the left or right, scroll to Horizontal shift .
5. Enter incremental values to shift the video image to the left (use a negative value) or right (use a positive value).

6. Click Apply. To view the output, add the source to a channel and click View from the Info page. You may need to make further adjustments to move the video left or right.

7. Make further adjustments and click Apply after each change to confirm the results.
8. To move the video up or down, scroll to Vertical shift.
9. Enter incremental values to shift the video image down (use a negative value) or up (use a positive value).
10. Click Apply.To view the output, add the source to a channel and click View from the Info page. You may need to make further adjustments to move the video up or down.