Standalone VGA Grid User Guide
You are here: Capture > Sources > Control audio volume

Adjust audio volume

If you find the volume is too high or too low for some of your audio sources, you can control the volume level via the Admin panel.

To adjust audio settings for gain and delay:

  1. Ensure an audio input source is connected to an analog audio input port.

  2. Login to the Admin panel as admin. See Connect to the Admin panel.

  1. From the Admin panel, scroll the Sources section.
  2. Select an audio source; the audio configuration page opens.

  1. Choose Line to capture high-powered audio signals from self-powered equipment, such as a CD player, synth or amp, or select Front Mic or Rear Mic to capture audio from a microphone connected to the audio input port.

"Passive" microphones requiring phantom power are not supported. Supported microphones require their own external power source, such as a battery.

Adjusting the Capture volume adjusts audio levels in the recorded and streamed output.

  1. Click Apply.