VGADVI Recorder Pro User Guide
the VGADVI Recorder Pro's Admin panel via DNS service discovery:
You are here: Setup > The Admin panel > Connect to the admin interface > Connect using DNS discovery
Connect via DNS-based service discovery
To ensure you have compatible software, refer to the following table.
Installing Bonjour Print Services
You must install Bonjour Print Services:
|Mac OS X||The Bonjour software used for service discovery is built into the Mac OS. No special actions are needed.|
|Linux||The Avahi implementation used for DNS-based discovery is shipped with most Linux distributions. If necessary, check with your administrator to ensure you have the Avahi package installed.|
- Find the system’s serial number. It is printed on a sticker on the back of the
- Type the following string into the address bar of your web browser on your admin computer, where <serial> is the serial number of your VGADVI Recorder Pro:
For example: http://95dd40d5.local/admin
- Enter the user name and password then click OK. The administrative user is 'admin'. Initially no password is set. To set a password follow the procedure outlined in User administration.
- Optionally, navigate to the Network link under the Configuration heading and note the IP address of the system.