Documents icon SDI+ user guide

Quickstart, or deep dive, our user guide has got you covered.

View guide
Chat icon

Community Forum

Get answers and share stories with the Epiphan community.

View forum

No! SDI+ is a UVC-based capture device meaning there is no software for you to install. Just plug it into your computer and you should see it as an available source, similar to using a webcam.

Videoconferencing applications like Teams, Zoom, and Google Meet will recognize SDI+ as a camera source. Most video capture and live streaming applications like VLC, OBS, Quicktime will work with SDI+.

Yes! Download the Config software to change the EDID, enable/disable special capture frame sizes, rename the device, configure audio mix/gain, and update firmware on your SDI+ device.

Absolutely! SDI+ supports video capture from 3G-SDI, HD-SDI and SD-SDI and audio capture from 3G-SDI and HD-SDI. SDI+ cannot save captured video as a movie on its own, but compatible third-party video capture applications have the ability to do so. SDI+ is compatible with both USB 3.0 (recommended) and USB 2.0 USB interfaces. SDI+ can capture at 60 fps at any resolution up to 1080p or 1920×1200 unless the application specifies a different frame rate.

That depends! For example, the source input resolution is smaller or larger than the output resolution selected by the third-party application in use, then capture resolution will be affected accordingly. SDI+ is designed to work with all UVC-friendly operating systems, specifically Windows 10 and higher, Mac (x10.10 and up), and Linux (kernel 3.5.0 or higher). Unfortunately, operating systems not listed may have poor support or no support at all for USB 3.0 and UVC-based capture hardware.

Yes, changing video sources will not negatively impact the capture signal.

Yes. Using Config, you can configure SDI+ to specify the exact resolution of your input signal.

Yes, you can connect multiple SDI+ devices to the same computer.

No, SDI+ uses uncompressed video format. SDI+ will have occasional firmware updates. Customers who have registered their SDI+ will be notified via e-mail of any new firmware upgrades. Register here. SDI+ has near-zero latency. However, third-party applications may cause additional capture delay.


These downloads give you access to the latest developments for your device. You can load this firmware onto your device using the Config tool. You can learn the full process for updating Firmware in our user guide.  
Firmware operating system: All

Configuration tool

For most uses, the configuration tool is not required. However, it is necessary for installing new firmware, and for advanced usages such as creating custom resolutions.
Operating system: Windows 10 64-bit, Windows 11 64-bit
  • Shield icon

    Support plans

    Protect your investment. Access service and support from the team that designs and builds the products.

  • Register icon

    Product registration

    Register your product to activate your warranty and access free, personalized customer support.

  • Product icon

    Epiphan returns

    Submit an RMA for purchases from Epiphan. For others, contact your authorized dealer.