User Guide
Understanding OSD menu settings
The OSD menu contains a variety of options to allow you to change settings on your LUMiO 12x.
OSD menu setting list
| Main menus | Submenus | Setting options |
|---|---|---|
| SYSTEM | PROTOCOL | VISCA, PELCO-D, PELCO-P |
| ADDRESS (sets your camera's address for RS-232 communication) | VISCA: 1-7, PELCO D/P: 1-255 | |
| BAUD RATE | 2400, 4800, 9600, 115200 | |
| PTL LOCK (protocol lock) | ON/OFF. Locks/unlocks the PROTOCOL setting. | |
| RS-485 | ON/OFF. Enables/disables RS-485 serial port communication. | |
| VGA OUT | Unused. | |
| TRANSFER (IR transfer/IR pass function) | USB, SERIAL or OFF | |
| LANGUAGE | Chinese, English, Spanish, Russian | |
| EXPOSURE | EXPOSURE MODE | AUTO, MANUAL or BRIGHT |
| SHUTTER (shutter speed in seconds) | 1/8–1/10000 s (only available if EXPOSURE MODE set to MANUAL) | |
| IRIS | CLOSE–F1.8 (only available if EXPOSURE MODE set to MANUAL) | |
| GAIN | 0dB–28dB (only available if EXPOSURE MODE set to MANUAL) | |
| BRIGHT | 0–15 (only available in bright priority mode) | |
| EC MODE (exposure compensation) | ON/OFF | |
| EC POSI (exposure compensation level) | 000–014 | |
| BLC (black light compensation) | ON/OFF | |
| IMAGE | WB MODE (white balance) | AUTO, INDOOR, OUTDOOR, MANUAL, OUTAUTO, SODIUM LAMP AUTO, SODIUM LAMP |
| R GAIN (red gain level) | 0–255 (only available if WB MODE set to MANUAL) | |
| B GAIN (blue gain level) | 0–255 (only available if WB MODE set to MANUAL) | |
| COLOR G (color gain) | 0~14 | |
| FLICK (anti-flicker) | 50/60 Hz (reduces video flicker) | |
| FREEZE | Freezes current frame (not supported) | |
| DZOOM (digital zoom) | On/Off | |
| FOCUS | Select FOCUS mode (automatic or manual) | |
| QUALITY | 2D NR (2D noise reduction) | 0~5; the bigger value, the less noise on image (at the cost of slightly lowered resolution) |
| 3D NR (3D noise reduction) | 0~3; the bigger value, the less motion noise on image | |
| SHARPNESS | 0~4 | |
| CONTRAST | 0~6 | |
| SATURATION | Set color saturation level | |
| TRACK MODE | PRECISE: Camera pans/tilts in small degrees with incremental motion FLUENT: Camera pans/tilts smoothly with unrestricted motion | |
| PTZ | PWR ACT (action upon power-on) | OFF (no action, just power on normally), PRE1 (preset 1), PRE2 (preset 2) |
| SPEEDBYZ (speed by zoom) | The bigger the zoom, the slower the speed | |
| MOUNT M | Mount mode: Up/Down | |
| FLIP HOR | Flip horizontal | |
| FLIP VER | Flip vertical | |
| PT SPD | Set pan/tilt speed | |
| ZOOM SPD | Set zoom speed | |
| MENU MIR | Turn on/off menu mirror function. Useful when navigating the OSD menu with your LUMiO 12x mounted on a ceiling. | |
| VIDEO FORMAT | 1080P 59.94 | Sets the video output to 1080P (progressive) resolution at 59.94 frame rate. |
| 1080P 50 | Sets the video output to 1080P (progressive) resolution at 50 frame rate. | |
| 1080I 59.94 | Sets the video output to 1080I (interlaced) resolution at 59.94 frame rate. | |
| 1080I 50 | Sets the video output to 1080I (interlaced) resolution at 50 frames per second. | |
| 1080P 29.97 | Sets the video output to 1080P (progressive) resolution at 29.97 frames per second. | |
| 1080P 25 | Sets the video output to 1080P (progressive) resolution at 25 frames per second. | |
| 720P 59.94 | Sets the video output to 720P (progressive) resolution at 59.94 frames per second. | |
| 720P 50 | Sets the video output to 720P (progressive) resolution at 50 frames per second. | |
| RESET | SYS RESET | System reset. |
| CAM RESET | Camera reset. | |
| PT RESET | Pan/tilt reset. Resets LUMiO 12x to its default position. | |
| ALL RESET | Performs a reset of system, camera and pan/tilt settings. | |
| MESSAGE | IR ADDR | Camera IR control address |
| FOCUS | Focus mode | |
| CLIENT | Client protocol (can’t be changed) | |
| MODEL NO. | Model number | |
| ARM VER. | ARM version | |
| FPGA VER. | FPGA version | |
| CAM VER. | Camera version | |
| RELEASE | Software release date |
