Enable or disable Epiphan Cloud access
Epiphan Cloud is where you go to remotely manage and control all your Pearl-2 devices. Access is enabled on Pearl-2 by default. All you need to do is pair Pearl-2 to your free Epiphan Cloud account for access to your device over the Internet. You can disable Epiphan Cloud access on Pearl-2 from the
Important considerations
- Unpair Pearl-2 from Epiphan Cloud before disabling Epiphan Cloud access on Pearl-2 using the Admin panel.
- If you disable Epiphan Cloud access while Pearl-2 is paired, the device instance in Epiphan Cloud goes permanently offline. For more information, see Pair and unpair from Epiphan Cloud.
Enable or disable Epiphan Cloud access using the Admin panel
- Login as admin, see Connect to Admin panel.
- From the Configuration menu, click Maintenance. The Maintenance page opens.
- Uncheck Enable Epiphan Cloud to disable the feature or leave it checked to allow Pearl-2 to access Epiphan Cloud. Click Apply to save your changes.
Enable or disable Epiphan Cloud access using the touch screen
- From the touch screen on Pearl-2, do the following:
- Tap the gear icon to open the System settings screen. If the control icons aren't showing, tap anywhere on the touch screen.
- Tap the arrow icon in the lower-right corner of the screen to go to the second Settings page.
- Tap Epiphan Cloud. The Epiphan Cloud settings page shows the status as enabled and displays a pairing code by default.
- Uncheck Enable Epiphan Cloud to disable the feature or leave it checked to allow Pearl-2 to access Epiphan Cloud.