Web Interface Overview

This section of the guide provides an overview of the EC20's web interface. The web interface is accessible using a browser on the same local network as the EC20, simply enter the IP address of the camera into the address bar. The default login credentials are:

username: admin

password: admin

 

Once you're logged in you should see a video player showing what the camera is seeing, this is the Live View page. On the left is a navigation bar for accessing other sections of the interface. For information on certain interfaces please check the relevant user guide section.

Live View

• This shows the current shot of the camera, you can make the image full screen, mute the audio, or pause the video stream.

Device Info

• This page shows some system information about your EC20.

  • Device ID: This is the name the camera will display in other applications. You can modify this.

  • Hardware Type: This is the internal hardware name.

  • Software Version: This is the current firmware version

  • Webware Version: This is the current version of the web interface, this is set via firmware updates.

  • Serial NO.: The serial number of this EC20.

Video

• Modify various settings related to the visual appearance of the video signal. See: Image and Video Settings.

Audio

• Modify the different audio settings. See: Audio Configuration.

Output

• Modify different aspects of the physical and network based video outputs. See: Configure Outgoing Video.

Tracking

• Modify settings related to the automatic tracking feature. See: Tracking Configuration.

System

• Access system settings, such as firmware update and user passwords. See: System Configuration.

Network

• Modify different network configuration settings, such as NTP or network ports used. See: Network Settings.

NDI®

• Modify certain settings and get other information relating to NDI®. See: NDI® Settings.

Overlays

• Modify settings related to the title and timestamp video overlays for your video streams. See: Overlay Settings.

Below the navigation tabs you'll find some controls. The small house surrounded by arrows allows you to control the pan and tilt functions of the camera, while the magnifying glasses control the zoom. Note that while tracking is enabled these controls will be disabled.

Below the PTZ controls you can also find the Preset settings. These allow you to set and recall specific positions for the camera. Move the camera where you want, type the number of the preset and click Set to set it. Once you've set some preset type the number and click Call to recall the preset.

Further down at the bottom are the Tracking settings. You can toggle tracking on and off, toggle the "tracking hint" that displays in the output to show when tracking is enabled or disabled, as well as set the Mode. See: Tracking Configuration.