System Configuration

Once you've logged in to the web interface of the EC20 you can click on the System section on the left. The System section of the web interface is divided into three tabs, Initialize, User, and Firmware Update.

Initialize

On this tab you can click the Reboot button to reboot the camera. You can also click Factory Default to return all of the settings to the factory defaults.

User

On this tab you can set the passwords for the admin and guest accounts. You can also enable or disable SSH functionality.

Firmware update

Occasionally there will be firmware updates for your EC20, these updates can resolve bugs, add new features, and more. It's generally always recommended to make sure your device is on the most recent firmware version.

1. On the Firmware Update tab you can upload the firmware update .IMG file.
   • Firmware files can be downloaded from the EC20 support page. See: https://www.epiphan.com/support/ec20-software-documentation/#firmware-software.
2. After uploading the file and clicking Update the EC20 will go through a reboot. Do not interrupt, manually reboot or power off, the camera during this process.
3. Once the update is finished you can try accessing the web interface to confirm the update as completed. You can see the new version on the Device Info page.