Configure recording settings, file size, and type

Recordings are saved as MP4 files by default. Each channel and recorder also has the default file size limit set to 500 MB and the default maximum time limit set to 30 minutes. When a recording reaches the file length of 30 minutes or 500 MB (whichever comes first), the system closes the current recording file and immediately opens a new one. No recorded data is lost.

If you don’t know what size to select, do some test recordings to get an idea of the file sizes you can expect. If you want to guarantee the recording lasts to a given time limit, select a file size that is far larger than you saw in your tests.

Important considerations

  • You cannot change the recording settings, file size, and type for channels used with Kaltura, Panopto, YuJa, and Opencast events.

The following table describes the recording configuration settings.

Recordings Configuration Settings

Label Description / Options
Time limit Specifies the length of time the system waits before the recording file is saved and a new one is started (assuming the size limit has not yet been reached). Values range from 5 minutes to unlimited. The MOV file type is limited to a maximum duration of 13h15m, regardless of the value set in the Admin Panel.
Size limit

Specifies the maximum file size a recording can reach before it is saved and a new recording is started (assuming the time limit has not yet been reached).

File type

Specifies the recording file type. Select from AVI, MP4, MP4-Fragmented, MPEG-TS, or MOV.

  • AVI: Generally used for playback on Windows.
  • MP4: A progressive version of MP4. Select MP4 for the best compatibility with most video players and editors. Progressive MP4 files are initially recorded as MP4-Fragmented and are converted when the recording ends.

If the recording is stopped while in progress or during conversion, the files remain in fragmented MP4 format. You can run the file through ffmpeg or another transcoder to convert to the progressive format.

  • MP4-Fragmented: A newer MP4 format. Fixed 10 second intervals. Select MP4-Fragmented for the same file format as releases 3.15.x. Some applications, like Adobe Premiere Pro, don't yet support fragmented MP4.

There's no way to tell the difference between MP4 files and MP4-Fragmented files from the file name because both use the .mp4 extension.

  • MPEG-TS:Does not support PCM audio encoding.
  • MOV: A progressive version of MOV. Generally used for playback on Mac OS. This type of MOV has the best compatibility with video players and editors.
Filename prefix

Specifies how the recordings are named. Recording files start with the given prefix followed by the date and time of the recording, which is set by the system. The channel or recorder name is used if no prefix is given. Allowed characters: A-Z, a-z, 0-9, _, , #, -, [], ().

Avoid using spaces in recording file names. Use underscores or hyphens to separate words instead.

Automatic file upload Select this if you want this channel or recorder to be part of any scheduled automatic uploads. See Automatic file transfers for information on automatic uploads.

Change the recording configuration using the Admin panel

  1. Log in to the Admin panel as admin, see Connect to the Admin panel.
  2. Open the recording page:  
    • For a channel, click the name of the Channel and then click Recording from the options that appear.
    • For a recorder, click the name of a recorder in the Multitrack Recorders section.
  3. Under Recorder Setup, select change. The recorder settings open.
  4. Change the default recording file settings.
    • Time limit: Select a value from 5 minutes to unlimited.
    • Size limit:
      • Select a value from 50 MB to 64 GB.
    • File type: AVI, MPEG-TS, MOV, MP4, or MP4-Fragmented.
  1. (Optional) Enter a prefix for the recordings. All new recorded files for this channel or recorder will be prefixed using the text you enter.
  1. (Optional) Check the check box to exclude this channel (or recorder) from automatic file uploads, see Automatic file transfers.
  2. Click Apply.