Add a custom No Signal image
By default the system displays a No Signal image when there is no video signal coming in to any of the video input ports on Pearl-2. You can customize this image to display a different message to your viewers. For example if a viewer logs in early, or if you are experiencing delays you could indicate the start time (or expected resolution time) using the no signal image.
Before you can specify a custom No Signal image for an input port on Pearl-2, you must upload it, see Upload or remove an image using the Media page.
Set the no signal image for an input port using the Admin panel
- Login to the Admin panel as admin, see Connect to Admin panel.
- From the Inputs menu, click the source name. The configuration page for the source opens.
- In the "No signal" image section, select an image from the Image drop down list.
- In the Timeout field, enter the number of seconds before the No Signal image is displayed. If no manual value is entered, the default time to display is 5 seconds.
- Click Apply.
- Test that the No Signal image is correctly applied by disconnecting your source and previewing the channel(s) containing said source, see Preview a channel.