Install the AV.io Config tool

Epiphan’s AV.io Config tool is used for loading firmware updates on your AV.io HD and for advanced settings changes.

You may install AV.io Config on the same computer(s) where you use AV.io HD, or only on one computer for configuration. All firmware updates and settings changes are saved to the device and work without any software installed on the computer. For settings to persist after power cycling, please allow 5 seconds before disconnecting or restarting device.

To install the AV.io Config tool, follow the directions below for your computer's operating system.

Windows

  1. Download the AV.io Config package under the Windows heading on the AV.io HD Downloads page on Epiphan’s web site.

    https://www.epiphan.com/support/avio-hd-drivers-documentation/

  2. Extract all the files from the zip file (remember the location you're unzipping to).
  3. Browse to the unzip folder and open the AV.io Config tool by double-clicking on AVioConfig.exe. (Depending on your local security settings, you may need to right-click and choose to run the file as an administrator).
  4. AV.io Config starts! If you video grabber is connected to the computer by USB, it is detected.

 

Mac

  1. Download the AV.io Config package under the Mac OS X heading on the AV.io HD Downloads page on Epiphan’s web site.

    https://www.epiphan.com/support/avio-hd-drivers-documentation/

  2. Double-click the downloaded file to open the disk image package.

  1. If desired, drag the AVioConfig application to your desktop or another location where you will find it for future use.
  2. Double-click the AVioConfig application icon to launch AV.io Config; a warning box appears.

  1. Click Open.
  2. AV.io Config starts! If you video grabber is connected to the computer by USB, it is detected.

Linux

  1. Download the AV.io Config package under the Linux heading on the AV.io HD Downloads page on Epiphan’s web site.

    https://www.epiphan.com/support/avio-hd-drivers-documentation/

  2. Untar and unzip the contents of the .tar.bz2 file (tar -xjvf can be used to untar and unzip in one command).
  1. Browse (or change directories) to the unzip folder.
  2. Either: Double-click the AV.io Config application icon or execute the AV.io Config application from the command line to launch AV.io Config (./AVioConfig).
  1. AV.io Config starts! If you video grabber is connected to the computer by USB, it is detected.