PreviousNextIndex

Epiphan Systems Inc.


Resetting image adjustments

Use the following procedure to turn off image adjustments settings so that image adjustments can return to being set automatically.

To reset image adjustments

  1. Start the video capture application.
  2. From the Capture menu select Configure Device.
  3. Select the Adjustments tab.
  4. Disable all types of image adjustments by clearing all checkboxes.
  5. Select OK.
  6. Close the video capture application.
  7. Disconnect the USB cable from the video capture workstation or from the Frame Grabber and wait at least 10 seconds.
  8. Reconnect the USB cable.
  9. Start the video capture application.

Image adjustments are now set automatically again.


Epiphan Systems Inc.
Frame Grabber User Guide, 1 February 2009
www.Epiphan.com
Contact us.

PreviousNextIndex